Ship types

PCTC

WE Tech's Solution for PCTC

WE Tech Solution Four is the most common solution used for PCTC. Solution Four uses the common DC-link of the WE Drive technology, thereby enabling new methods of distributing power in energy-efficient and economical ways.

The shaft generator solution also improves the Energy Efficiency Design Index (EEDI) for the vessel as it can be used as a booster for the main engine. Using the shaft generator for boosting the main engine to reach the maximum speed of the vessel allows much higher flexibility on main engine selection and thus further improving the energy efficiency of the vessel.

DC Power from the frequency drives for the shaft generator can be distributed to inverter units for powering the tunnel thrusters. The use of frequency inverter units over normal AC frequency converters will greatly reduce THD on main switchboard.

Why WE Tech Solutions

WE Tech Solutions is a company specialised in developing energy efficient solutions for ships and the market leader for permanent magnet shaft generator solutions. WE Tech have long experience in developing the most energy efficiency solution for any vessel type.

Key Benefits

  • Reduced fuel consumption and emissions due to the difference in SFOC between the main engine and auxiliary engines
  • Reduced maintenance costs due to less running hours on auxiliary engines
  • A permanent magnet shaft generator is virtually maintenance-free, offering the highest efficiency and highest power density.
  • Higher flexibility on auxiliary engine selection.
  • Enhanced control and power management
  • Compliance with environment regulations IMO’s EEDI and EEXI.

WE Tech's Solution for PCTC

Solution Four DC-link Power Distribution

Taking advantage of the already existing variable frequency drives the vessel can allow shore frequencies of both 50Hz and 60Hz to be connected to the vessel. This will further enhance the environmental footprint when auxiliary engines can remain shut off during cargo operations in port.

See more of Solution Four

As an option the shaft generator can have two separate windings, each winding feeding the main switchboard via its own frequency drives. This will eliminate a blackout in case of a failure in any of the two feeders as the other remain intact.

See more of Solution Four

Peak-shaving

The Peak-shaving mode can be used for supporting auxiliary engines by taking on fast load changes and keeping electrical load as seen for auxiliary engines constant.

Spinning reserve

Spinning reserve functionality provides an energy reserve for power generation, allowing for single generator operation.

Black-out prevention

In case a generator is unexpectedly shut down, the ESS keeps the electrical network energized until a Stand-by Auxiliary Generator comes on-line.

See more of Solution Four

DC Power from the frequency drives for the shaft generator can be distributed to inverter units for powering heavy consumers, such as a bow thruster and a cargo handling system. The use of frequency inverter units over normal AC frequency converters will greatly reduce THD on main switchboard.

See more of Solution Four

Solutions towards Zero Emission Shipping

WE equip your ship for success.

Our solutions build on widely proven technologies and are applicable for most ship types and propulsion machinery (e.g. low speed direct driven propeller with 2-stroke Main Engine, or medium speed reduction gear driven propeller with 4-stroke Main Engine). 

WE Tech solutions utilise variable frequency drive technology (WE Drive®), permanent magnet generator technology, DC-link power distribution and Energy Management System(EMS).

With our domain expertise, you can get a ship with an energy system built the way it should.

Variable frequency drive technology for generator/motor applications is a compact and robust modular design.

The variable speed permanent magnet generator is lightweight, and compact-sized with the highest efficiency over the full speed and power range. It is virtually maintenance-free. We also offer solutions based on synchronous and asynchronous generator technology.

We use the latest lithium-ion technology from the Energy Storage System (ESS) suppliers. With a DC-DC converter, we integrate the ESS into our solution.

With the Energy Management System(EMS), we control various operation modes of the ship as well as start/stop sequences, etc. The EMS also interfaces with other control systems on board a ship.

Shore power is conditioned for the vessels’ electrical system via the WE Drive®. Vessels become unaffected by the variations in voltages and frequencies of the national power grids worldwide – shore power is always matching.

Fuel Cell Integration via DC/DC conversion to the ship energy efficient power distribution system. Seamless operations utilising Fuel Cells and ESS combinations for zero emission power.

Reference cases

Solutions applied on over 150 vessels worldwide

We have been focusing on lowering emissions for years by providing cost-effective and sustainable lifetime solutions to the shipping industry. Our benchmarking solutions have already been applied to more than 150 vessels worldwide.

Search
Close this search box.

Book Your Meeting

Contact us today to tailor a solution for your vessel.

Name(Required)
This field is for validation purposes and should be left unchanged.